: Your case will have several small, two-pin connectors coming from the front panel. Each is typically labeled:
: The row of pins positioned closer to the internal center of the motherboard (near the PCIe slots) holds the odd numbers.
: For LEDs (HDD and Power), polarity is crucial. The positive wire is usually colored (often red or blue), while the negative is white or black. Many connectors also have a small arrow on the back indicating the positive side. acer ipisb-vr rev 1.01 front panel
Plug the POWER SW connector into pins 6 and 8 . These are the two vertical pins located in the second row, second pair from the edge.
: The row of pins closest to the PCIe sockets and CPU (the upper row). : Your case will have several small, two-pin
This guide provides the necessary pinout diagram and instructions to connect your power button, HDD LED, and power LED, allowing you to move this motherboard to a new chassis. 1. Understanding the IPISB-VR Front Panel Layout
: Because Acer uses an OEM (Original Equipment Manufacturer) design, their front panel cables are often a single solid block. If you are moving this motherboard to a new "aftermarket" case, you may need to plug in individual 2-pin cables for each function. moving this board to a new case , or just trying to fix a loose wire in the original Acer tower? Front panel pin installation, help! - Acer Community The positive wire is usually colored (often red
The front panel header is located at the bottom-right corner of the motherboard, near the SATA ports, and is usually a 14-pin white or black block header. Pin Orientation
Ignore the standard GROUND pin usually found on pin 5 of standard boards—Acer uses pin 5 as a second ground, which is fine.
The Acer IPISB-VR Rev 1.01 is a Micro-ATX motherboard commonly found in legacy Acer Aspire and Gateway desktop systems. Because these are "OEM" boards, the front panel headers aren't always labeled as clearly as aftermarket boards. The Front Panel Layout