Amt-78 User Manual !new! Online

Once installed, operating the AMT-78 is straightforward. The ride begins its cycle after a coin is inserted and the signal is successfully transmitted to the controller. The device's interface is built around a central knob and button setup for rapid navigation and adjustment. Here's how to manage the typical day-to-day operations:

Use the arrows to adjust the exact countdown intervals.

Usually a mini or micro-USB port for the internal rechargeable battery. 2. Connecting the Hardware Safety First: Ensure your mounting mast is secure.

The AMT-78 is designed to operate on a standard 12V DC power supply, which is common for many kiddie ride systems. amt-78 user manual

The AMT-78 is weather-resistant but not fully waterproof. Do not submerge the unit or expose it to heavy downpours.

Understanding the power requirements and hardware limits of the board is necessary before attempting any electrical wiring. AMT-78 (TAIDI Series) Input Voltage: AC 110V / 220V (50Hz) Output Current: 0 to 10 Amps (variable load protection) Timer Adjustment Range: 1 to 10 minutes per coin/session Counter Capacity: 1 to 9999 cycles Audio Format Support: MP3 files via localized SD Card

The integrated 4-digit counting display tracks up to 9,999 operations. This tool lets route owners audit coins, check earnings, and track usage without manual external loggers. Installation and Wiring Matrix Port Identifier Terminal Connection Type Functional Purpose Dual 110V/220V Mains Terminal Delivers system operating power. MOTOR-OUT 12V/24V DC Dynamic Output Controls swing machine actuator movement. COIN-IN NO/NC Dry Contact Microswitch Registers coin insertion pulses. LED-GRID External Flashing Output Pins Synchronizes lighting with game events. AUDIO-OUT 4-Ohm / 8-Ohm Speaker Output Outputs system sounds and MP3 music. Step-by-Step Programming and Configuration Step 1: Setting Session Timers Once installed, operating the AMT-78 is straightforward

Use to change the number, and ◀ to move left to the next digit.

First, check the simple things. Does the ride's indicator light come on? If it lights up but doesn't start, the problem is most likely not the controller itself but a faulty connection in the coin signal wiring . Check the wires from the coin acceptor to the AMT-78 for any cracks or loose connections. If it's completely dead, the internal MP3 board may have failed, and a replacement unit is recommended.

Yes, the device's construction uses materials that comply with international toy safety standards like EN71 and CPSIA , which prioritize child safety. Here's how to manage the typical day-to-day operations:

3.4 Installation and commissioning

Turn off the unit and allow it to cool down away from direct heat.