Ats20 Radio Manual Better __full__ [VERIFIED]
If your ATS20 goes completely deaf or shows "S9+60dB" on every frequency, you are experiencing front-end overload.
: In AM or SSB modes, short press the modulation button to switch between modes like FM, AM (MW/SW), and SSB (LSB/USB).
The ATS-20 (and its popular ATS-20+ upgrade) is one of the most affordable, compact, and versatile shortwave receivers on the market. Powered by the Si4732 telemetry chip, this tiny radio covers FM, AM, Shortwave (SW), Longwave (LW), and Single Sideband (SSB). However, the documentation shipped in the box is notoriously brief and poorly translated.
The stock ATS-20 is a capable receiver, but it is heavily bottlenecked by its included telescoping whip antenna and internal shielding. Implement these tweaks for a dramatic boost in performance: Upgrade Your Antenna ats20 radio manual better
Changes the frequency tuning increment when rotating the encoder knob. Options typically range from 1 kHz up to 100 kHz for quick scanning.
Note: Some kits require user assembly of the case or battery. If received unassembled, see Section 8.
The ATS-20 is a capable receiver, but its performance depends heavily on environmental factors and your antenna setup. If your ATS20 goes completely deaf or shows
Take the radio outside to a park or backyard away from household electronics to experience dead-silent noise floors and crystal-clear DXing (long-distance receiving). Use the Bandwidth Filter Strategically
This article serves as your guide. We are going to make the manual obsolete. By the end of this guide, you will know how to navigate the menu, master hidden features, and troubleshoot common issues better than 99% of other users.
| Menu Item | Description | Range / Options | |-----------|-------------|------------------| | | Audio output level | 0–30 (default 15) | | Step | Tuning step size | 1 kHz, 5 kHz, 10 kHz, 100 kHz, 1 MHz | | AGC | Automatic Gain Control | On / Off | | Attenuator | Reduces strong signal overload | 0 dB / 20 dB | | Bandwidth | IF filter width | AM: 2.2/3.0/4.0 kHz, SSB: 1.8/2.2 kHz | | Battery | Voltage readout (monitor only) | 3.3V – 4.2V | | Backlight | LCD backlight timeout | Always on / 10s / 30s / 60s | | Save Settings | Store all current settings to EEPROM | Yes / No | Powered by the Si4732 telemetry chip, this tiny
When listening to Single Sideband (SSB) signals, voices may sound robotic or high-pitched.
Download and install the or XLoader utility on your PC.
