Adjust the control to lower the reading back down to roughly the middle of the scale (around 50).
Slowly rotate the dish. The meter will provide an that increases in pitch as you get closer to the signal.
The signal path is: Satellite Dish (LNB) -> RV3 Digital Satellite Finder -> Satellite Receiver deutsche technologies rv3 digital satellite finder manual
If the meter hits 99% or maxes out, turn the DB knob down to lower the reading back to 50%–60%. Continue micro-adjusting the dish to find the true peak center of the beam.
Built-in buzzer that increases in pitch as signal strength improves 2. Hardware Layout and Button Functions Adjust the control to lower the reading back
Directional arrows for moving through menus, an OK button to confirm selections, and a Menu or Exit key to return to the previous screen.
Connect a short coaxial jumper cable (not included) from this port directly to the Low-Noise Block downconverter (LNB) on your satellite dish arm. The signal path is: Satellite Dish (LNB) ->
Listen to the audio buzzer. The pitch will rise noticeably as signal strength improves.
While water-resistant, the RV3 is not fully waterproof. Do not leave it permanently installed outdoors or exposed to heavy downpours.