Press the physical power button on your Epson L5190 to turn it off. Click on the computer screen prompt.
: Open the small compartment at the back of the printer, remove the waste ink box, and replace the saturated cotton pads with a new set.
Once the software is open, follow these steps to reset the printer: Select Model: as the model, and set the Port to Auto Selection Adjustment Mode: Particular Adjustment Mode Maintenance: Under the Maintenance tab, select Waste ink pad counter Check & Initialize: Check the boxes for Main pad counter Platin pad counter (if available).
| Problem | Likely Cause | Solution | |---------|--------------|----------| | “Communication error” | USB cable loose or driver missing | Reinstall Epson driver; use a short USB 2.0 cable | | “Counter read failed” | Firmware version too new | Downgrade printer firmware (advanced) or use a paid WIC reset | | “Key invalid” | Key generator mismatch | Ensure generator matches exact tool version | | Printer still shows error after reset | Physical pad still full | Clean or replace waste ink pad | | Resetter crashes on Windows 10/11 | Compatibility mode needed | Run in Windows 7 compatibility mode | epson l5190 resetter work
Here are a few options for the text regarding the "Epson L5190 resetter," depending on where you intend to use it (e.g., a blog post, a YouTube description, or a service page).
Locate a verified version of the Epson L5190 Adjustment Program. The files usually arrive in a compressed ZIP or RAR archive. Extract the contents to a dedicated folder on your desktop. Step 2: Configure Connection Settings
The software reads the current value of the main waste ink pad counter, which is likely at or near Press the physical power button on your Epson
Download the Epson L5190 Adjustment Program and extract the file (e.g., using WinRAR).
Security software often flags these utilities as "false positives." It is recommended to temporarily disable Windows Real-time Protection and antivirus software before downloading or running the program.
A prompt will appear on your screen saying: "Please turn off the printer." Press the physical power button on your Epson L5190 to shut it down completely. Once the printer is off, click on the computer screen prompt. You can now turn the printer back on; the error lights should be gone, and the status monitor will display the printer as ready. Once the software is open, follow these steps
Turn the printer back on. Check the counters one more time using the "Check" button. They should now read 0 points (0%). Crucial Hardware Warning: Do Not Ignore the Physical Pads
(free/paid via third-party)