Leica Tcr805 Total Station User Manual Work [updated] Info

Choose your method: (manually setting a known azimuth) or Coordinates (sighting a known control point).

: Clean optical lenses only with specialized photographic lens paper or microfiber cloths to protect anti-reflective coatings.

To establish the instrument position over a known coordinate point: Select Station from the program configuration menu. Enter the Station ID, Instrument Height ( ), and known Easting ( ), Northing ( ), and Elevation ( ) values. Press REC . Select Orientation then choose Coordinates or Angle . leica tcr805 total station user manual work

: Turn on the electronic level by pressing the FNC key and selecting Level/Plummet . Align the housing parallel to two footscrews. Turn them in opposite directions until the electronic X-axis reads zero. Rotate the instrument 90 degrees and adjust the third footscrew until the Y-axis reads zero.

Move the tripod legs to center the laser dot precisely over your ground nail or marker. Leveling the Tribrach Choose your method: (manually setting a known azimuth)

Use the circular bubble vial for rough leveling by adjusting the tripod legs.

Periodically perform a "Check and Adjust" routine, which is an onboard program that guides you through calibrating the horizontal collimation and tilting axis inclination. If the instrument suffers a significant bump or drop, it should be sent to a certified Leica service center for professional calibration. Enter the Station ID, Instrument Height ( ),

Press the ALL key. The station records point number, horizontal angle, vertical angle, slope distance, and calculated 3D coordinates instantly. 5. Construction Stakeout (Setting Out)