Assign VHF or UHF frequencies to specific channels.
If you want, I can:
A reliable programming cable is critical. The GM360 uses a serial interface that connects directly to the radio's microphone jack (RJ45 connector) on the front panel, eliminating the need to open the radio case.
The GM360’s 15-pin accessory port uses pin 2 (BUS+), pin 7 (Data), pin 12 (GND), and pin 13 (BUS-). A quality cable will handle this automatically. motorola gm360 programming software
Motorola GM360 Go to product viewer dialog for this item. is a cornerstone of the Professional Series mobile radios . To customize its 255 channels, programmable buttons, and advanced signaling (like 5-tone and Private Line), you must use specific and hardware. The Core Software: Professional GP/GM Series CPS Go to product viewer dialog for this item.
The (USB or Serial/DB9) you are using.
Software is useless without the right cable. The GM360 uses a specific 15-pin D-sub accessory connector on the rear of the radio. Assign VHF or UHF frequencies to specific channels
Go to in the top menu and select the correct COM port assigned to your cable. (You can verify this number in the Windows Device Manager). Step 2: Read the Radio (Back Up First)
The Motorola GM360 belongs to the Professional Series (Warwaris) of radios. The specific software used to configure these devices is the Customer Programming Software, commonly referred to as CPS.
: Add or remove channels (up to 255) and configure RX/TX frequencies, offsets, and channel spacing. The GM360’s 15-pin accessory port uses pin 2
The programming process for the GM360 is straightforward in concept but demands specific tools and software. Because the radio is legacy equipment, there is no single official download page hosted by Motorola. Instead, programming relies on , a software package originally developed for the entire GM/GP 300-series radio family.
Before diving into the software, ensure you have the correct hardware interface. Without the right physical connection, the software cannot communicate with the radio's logic board.