The supplied remote puts control of your entire system at your fingertips. To program it, insert two , ensuring the positive (+) and negative (-) ends match the diagram in the compartment. The remote uses MASTER VOL + / – buttons for main volume and allows you to switch between components, like DVD or SA-CD/CD , to control different devices.
Under speaker size, select if you are using the original satellite speakers that came with the system. This cuts off low frequencies to the satellites and routes all heavy bass to the subwoofer. Select LARGE only if you are using full-range tower speakers. Troubleshooting Common Issues
Users generally consider it a solid "first receiver" for those on a tight budget, though dedicated audiophiles often view it as "low-end" gear.
RCA jacks for standard stereo components. sony str k670p manual
100 watts per channel into 8 ohms (at 1 kHz, with 0.7% Total Harmonic Distortion).
: Users can adjust speaker distance in 0.1-meter steps (ranging from 1.0 to 7.0 meters) to ensure sound from the front, center, and surround channels reaches the listening position simultaneously. Surround Sound and Processing
To listen to any connected component, you must select the correct input on the receiver: The supplied remote puts control of your entire
If you do not hear sound, you may need to map the digital jack to your current input source.
: Connect a mono RCA cable from the SUBWOOFER AUDIO OUT jack to the line-in jack on your powered subwoofer. The STR-K670P does not power a passive subwoofer. 2. Digital Audio Inputs
If the receiver suddenly turns off and the display shows "PROTECT", it has activated a safety circuit. This usually means there is a problem with speaker wiring. Under speaker size, select if you are using
: Outputs sound only through the front left and right speakers, bypassing the center and surrounds.
The STR K670P uses a vacuum fluorescent display (VFD). Dimming suggests aging or low voltage. No repair is practical. Solder replacement is possible but requires donor parts.
If the system menus become corrupted, or if you want to wipe out custom speaker calibrations back to factory defaults, perform a factory reset: Press the button to turn off the receiver.
To get true 5.1 surround sound, you must use a digital connection.
© The Audio Beat • Nothing on this site may be reprinted or reused without permission.